Suspender System

Suspender Attachment Instructions

STEP 1

Completely unzip the dry suit entry zipper as shown.

STEP 2

Open the dry suit so that the front and back attachment loops are accessible as shown.

STEP 3

Attach the end of the suspender, with the buckle, to the suit's front attachment point by unpeeling the Velcro® flaps and lifting the Velcro® strap that is folded on itself. Fold the flaps over the strap so that hook Velcro® faces hook Velcro®. Pass the suspender through the attachment loop. The strap end can now be folded over itself so the Velcro® patches close. To secure the suspender, wrap the Velcro® flaps around the edges of the strap and attach to Velcro® on the opposite side of the strap.

STEP 4

While keeping the strap straight, attach the non-adjusting end of a suspender to the dry suit's back attachment point as shown. This procedure should be similar to Step 3.

STEP 5

Repeat these steps to attach the other suspender. It is recommended to use two suspenders for even support.

STEP 6

Alternatively, the suspenders may be attached so they are crossed over the users back.

STEP 7

Use the suspender strap ends to adjust for a secure comfortable fit.